Lagerung
-
Batterien sind verderblich und müssen daher bei der Lagerung sorgfältig behandelt und überwacht werden.
-
Aufgrund ihrer ständigen internen chemischen Reaktion verlieren sie mit der Zeit an Ladung.
-
Lagern Sie die Batterie immer aufrecht und nicht auf dem Boden, sondern an einem kühlen, trockenen und gut belüfteten Ort.
-
Verwenden Sie das „First In First Out”-Verfahren zur Lagerumschlagshäufigkeit, um sicherzustellen, dass alle Bestände aktuell sind.
-
Führen Sie jeden Monat eine Spannungsprüfung durch. Laden Sie die Batterien wieder auf, wenn die Spannung


Verkauf
-
Überprüfen Sie die Anforderungen an die Originalbatterie des Fahrzeugs unter fit.gs-battery.com.
-
Fragen Sie den Kunden nach seinen Fahrgewohnheiten. Für kurze oder seltene Fahrten empfehlen Sie immer „Upgrade plus“
-
Sie müssen AGM durch AGM ersetzen. Ersetzen Sie EFB durch EFB oder AGM.
-
Wenn fit.gs-battery.com angibt, dass eine Neuprogrammierung des Fahrzeugs erforderlich ist, informieren Sie den Kunden darüber.
-
Überprüfen Sie die Spannung der Batterie mit einem GYT250 oder einem Multimeter.
-
Wenn die Spannung unter 12,5 V liegt, laden Sie die Batterie
Retouren
- Überprüfen Sie anhand des Kaufbelegs, ob die Garantie noch gültig ist und der Kunde der ursprüngliche Käufer ist.
- Stellen Sie unter fit.gs-battery.com sicher, dass die Batterie für das Fahrzeug geeignet ist.
- Fragen Sie den Kunden nach seinen Fahrgewohnheiten, um festzustellen, ob diese zu Schäden geführt haben könnten. Beispielsweise seltene Nutzung.
- Überprüfen Sie die Batterie auf Anzeichen von physischen Schäden, Aufblähungen oder Missbrauch.
- Verwenden Sie ein GYT250-Prüfgerät, um zu überprüfen, ob sie im Rahmen der Garantie ersetzt werden muss.
- Nur die Anzeige „BAD CELL – WARRANTY ACCEPTED” (Defekte Zelle – Garantie akzeptiert) ist eine gültige Garantie.
- Im Falle eines Austauschs wird die Garantie nicht verlängert, sondern gilt ab dem ursprünglichen Kaufdatum.


Prüfung
GS Yuasa GYT250 Batterie- und Elektrosystem-Prüfgerät
-
Klemmen sicher anschließen
-
Richtigen Batterietyp auswählen
-
Richtige Batterietechnologie auswählen
-
EN-Norm für alle GS Yuasa-Batterien auswählen
-
CCA-Wert der Batterie einstellen
Nur bei der Anzeige „BAD CELL – WARRANTY ACCEPTED” (Defekte Zelle – Garantie akzeptiert) handelt es sich um eine echte Garantierückgabe.
Ausfall
Nicht unter die Garantie fallende Gründe für einen Ausfall der Batterie
- Lebensdauerende: Eine Batterie ist ein Verschleißteil, das mit der Zeit an Leistung verliert.
- Hohe Temperaturen: Übermäßige Hitze beschleunigt die Entladung und kann zu Schäden führen.
- Kälte: Bei winterlichen 0 °C haben Batterien 30 % weniger Leistung als bei sommerlichen 20 °C.
- Seltener Gebrauch: Ein geparktes Auto verbraucht Strom für Standby-Systeme. Und selbst wenn es abgeklemmt ist, entlädt sich eine Batterie durch Selbstentladung.
- Kurze Fahrten: Kurze Fahrten gleichen den beim Starten verlorenen Ladungsverlust nicht aus. Im Winter verschlimmern Heizung, Beleuchtung und andere Zusatzgeräte diesen Effekt noch.
- Alterndes Fahrzeug: Die Leistung des Ladesystems, des Anlassers und der Batterie nimmt mit zunehmendem Alter ab.
Unsachgemäße Verwendung: Einbau einer falschen Batterie in ein Fahrzeug oder Verwendung der Batterie für falsche Anwendungen. - Menschlicher Faktor: z.B. das Übernacht-Licht anlassen.
- Garantieausnahmen umfassen:
Taxis | Einsatzfahrzeuge | Sonderfahrzeuge | Krankenwagen | Anhänger | Wohnwagen | Rasenmäher | Elektrorollstühle | Elektrofahrräder | Elektrozäune | Golfwagen | Golfbuggys


Workshop poster
Download our workshop poster or speak to your GS distributor to collect your free copies.


At GS Yuasa, we're committed to driving innovation in battery technology, offering advanced solutions for the automotive industry's shift towards sustainability and fuel economy. Our cutting-edge battery technologies, including Absorbent Glass Mat (AGM) and Enhanced Flooded Battery (EFB) are designed for the latest emission control systems, setting new standards in performance and reliability.
The need for innovation
EU legislation within the automotive industry sets ambitious targets for CO2 emissions reductions. GS Yuasa's battery technologies are pivotal in enabling vehicles to meet these standards, supporting eco-friendly innovations like Start - Stop systems, charge management, and regenerative braking.
Start - Stop systems: these systems automatically turn off the engine when the vehicle is stationary and restart it upon movement, significantly increasing the battery's engine start requirements from a few times to dozens of times a day.
Charge management: to improve fuel economy, our batteries support systems that control the charging process, adapting to the vehicle's electrical needs without full charging.
Regenerative braking: these systems harvest the kinetic energy produced during braking and convert it into electrical energy for storage and use, thus enhancing efficiency and reducing waste.


Introduction to advanced battery technologies
AGM and EFB batteries: a leap forward
GS and Yuasa Absorbent Glass Mat (AGM) and Enhanced Flooded Battery (EFB) types are designed to meet the high demands of modern vehicles. These batteries are essential for vehicles equipped with Start - Stop systems, offering significantly higher start cycles and durability.
It's vital to replace your vehicle's battery with the same technology (AGM or EFB) originally installed to maintain emission control systems' functionality and avoid premature battery failure. Incorrect battery replacement can lead to loss of Start - Stop functionality, causing a risk in CO2 emissions, and reduced fuel economy.
Many vehicles fitted with an AGM or EFB battery will require battery validation using an OBD configuration tool after a replacement. See our Yu-Fit page [INSERT for more details.


AGM batteries
Known for their exceptional Start - Stop performance, our GS and Yuasa AGM batteries provide up to 360,000 starts, with superior charge acceptance and durability.
- Construction: AGM batteries feature absorbent glass mat that absorbs and contains all the electrolyte, preventing leaks.
- Benefits: superior Start - Stop performance, high dynamic charge acceptance, and exceptional durability.
- Applications: ideal for high-end vehicles with extensive electronic systems and regenerative braking capabilities.


EFB batteries
With up to 270,000 starts, our GS and Yuasa EFB batteries offer an excellent solution for entry-level Start - Stop vehicles, combining cost-effectiveness with performance.
- Construction: EFB batteries enhance the traditional flooded design by utilising carbon and lithium additives in the negative plate and high-density active material in the positive plate to improve durability and performance.
- Benefits: enhanced charge acceptance and greater cyclic durability.
- Applications: perfect for entry-level Start - Stop vehicles and the recommended choice for standard ignition vehicles that make lots of regular short journeys such as taxis & delivery vehicles.
Maintenance and charging
Both EFB and AGM battery types are designed to be maintenance free, although, as with all batteries periodic charging may be required during times of storage or reduced usage. For AGM batteries it is crucial to use a smart charger compatible with AGM technology to prevent damage and maintain battery health. EFB types can usually be charged on a smart charger’s ‘wet’ battery setting.
Hybrid and electric vehicle battery solutions
GS Yuasa's portfolio extends beyond AGM and EFB to include advanced battery solutions for hybrid and electric vehicles (EVs), employing state-of-the-art lithium-ion technology. These batteries are designed for the high voltage and energy requirements of EVs, offering longevity and efficiency critical for sustainable transportation. To find out more visit ??? PAGE REQUIRED


Latest news & articles
GS Yuasa Battery Europe Ltd
GS Yuasa are one of the world’s largest global manufacturers of Lead-Acid and Lithium-ion (Li-ion) batteries. For over 30 years, GS Yuasa Battery Europe Ltd have been Europe’s leading battery supplier and the number one choice for quality, performance and reliability.
GS Yuasa Battery Europe Ltd consists of five sales companies and one battery manufacturing company.
Vehicle make and model




Motorcycle & Power Sport




Replace This


Leisure, Marine & Garden




Motorcycle & Power Sport




Replace This


Leisure, Marine & Garden




Motorcycle & Power Sport




Replace This


Leisure, Marine & Garden




Motorcycle & Power Sport




Replace This


Leisure, Marine & Garden




Motorcycle & Power Sport




Replace This


Leisure, Marine & Garden
Find a distributor
Store locator lookup here, once installed & configured
Explore more products
Latest news and articles
GS Yuasa Battery Europe Ltd
GS Yuasa are one of the world’s largest global manufacturers of Lead-Acid and Lithium-ion (Li-ion) batteries. For over 30 years, GS Yuasa Battery Europe Ltd have been Europe’s leading battery supplier and the number one choice for quality, performance and reliability.
GS Yuasa Battery Europe Ltd consists of five sales companies and one battery manufacturing company.














