6V 112Ah 400A(EN) - Classic & oldtimer series battery
6V 112Ah 400A(EN) - Classic & oldtimer series battery
521
6V 112Ah 400A(EN) - Classic & oldtimer series battery
RRP
Yuasa classic and oldtimer batteries feature specialist internal components and a unique design developed to meet the cyclic requirements of classic and vintage vehicles. These 6 Volt lead acid batteries provide dependable starting power and their hard rubber case and vintage Yuasa logo give the ultimate period look and feel.
Features:
- For classic and vintage vehicles with 6 Volt electrical systems
- Original equipment (OE) quality, performance and specification
- Authentic period look and feel
- Vibration resistant
- Hard rubber case
Specification
| Range | Classic & Oldtimer |
|---|---|
| Nominal Voltage | 6 V |
| Performance Marking | W1-C1-V1-E1 |
| Capacity (20hr) | 112 Ah |
| CCA | 400 A |
| Length | 291 mm |
| Width | 170 mm |
| Terminal Type | T1 |
| Height | 227 mm |
| Layout | 0 |
| Case Type | Hard Rubber |
| Hold-down | N |
| Handles | No |
| End Venting | No |
| Lid Type | Raised Plug |
| Flame Arrestor | No |
| Technology | Sb/Sb |
| Separator Type | PE |
| Recommended Charge Rate (A) | 8 |
| VDA Roll Over Test | No |
Product specifications are provided for guidance only and may vary due to manufacturing across multiple production facilities. Changes to product details may occur without prior notice.
Yuasa classic and oldtimer batteries feature specialist internal components and a unique design developed to meet the cyclic requirements of classic and vintage vehicles. These 6 Volt lead acid batteries provide dependable starting power and their hard rubber case and vintage Yuasa logo give the ultimate period look and feel.
Features:
- For classic and vintage vehicles with 6 Volt electrical systems
- Original equipment (OE) quality, performance and specification
- Authentic period look and feel
- Vibration resistant
- Hard rubber case
Specification
| Range | Classic & Oldtimer |
|---|---|
| Nominal Voltage | 6 V |
| Performance Marking | W1-C1-V1-E1 |
| Capacity (20hr) | 112 Ah |
| CCA | 400 A |
| Length | 291 mm |
| Width | 170 mm |
| Terminal Type | T1 |
| Height | 227 mm |
| Layout | 0 |
| Case Type | Hard Rubber |
| Hold-down | N |
| Handles | No |
| End Venting | No |
| Lid Type | Raised Plug |
| Flame Arrestor | No |
| Technology | Sb/Sb |
| Separator Type | PE |
| Recommended Charge Rate (A) | 8 |
| VDA Roll Over Test | No |









