12V 135Ah 910A(EN) - GS MF Super Heavy Duty series battery
12V 135Ah 910A(EN) - GS MF Super Heavy Duty series battery
MF615
12V 135Ah 910A(EN) - GS MF Super Heavy Duty series battery
RRP
- Designed for vehicles with basic power demands
- High Vibration resistance – V2
- E1 Endurance rating – over 80 cycles (50% DOD)
- Maintenance free with easy access lid plugs for topping up if required
- Original equipment (OE) quality, performance & specification
- Specially designed & constructed for the rigours of commercial, agricultural & plant vehicle applications
- Enhanced safety features including integrated flame arrestor & carrying handles
MF620, MF621, MF623, MF624, MF625, MF629 & MF632 batteries – NOT suitable for end of chassis location
Specification
| Range | GS MF Super Heavy Duty |
|---|---|
| Nominal Voltage | 12 V |
| Performance Marking | W3-C2-V3-E1 |
| Capacity (20hr) | 135 Ah |
| CCA | 910 A |
| Length | 514 mm |
| Width | 175 mm |
| Height | 210 mm |
| Terminal Type | T1 |
| Layout | 3 |
| Case Type | MAC 110 |
| Hold-down | B13 |
| Handles | Yes |
| End Venting | Yes |
| Lid Type | SMF |
| Flame Arrestor | Yes |
| Technology | Ca/Ca |
| Separator Type | PE |
| Recommended Charge Rate (A) | 8 |
| VDA Roll Over Test | No |
Product specifications are provided for guidance only and may vary due to manufacturing across multiple production facilities. Changes to product details may occur without prior notice.
- Designed for vehicles with basic power demands
- High Vibration resistance – V2
- E1 Endurance rating – over 80 cycles (50% DOD)
- Maintenance free with easy access lid plugs for topping up if required
- Original equipment (OE) quality, performance & specification
- Specially designed & constructed for the rigours of commercial, agricultural & plant vehicle applications
- Enhanced safety features including integrated flame arrestor & carrying handles
MF620, MF621, MF623, MF624, MF625, MF629 & MF632 batteries – NOT suitable for end of chassis location
Specification
| Range | GS MF Super Heavy Duty |
|---|---|
| Nominal Voltage | 12 V |
| Performance Marking | W3-C2-V3-E1 |
| Capacity (20hr) | 135 Ah |
| CCA | 910 A |
| Length | 514 mm |
| Width | 175 mm |
| Height | 210 mm |
| Terminal Type | T1 |
| Layout | 3 |
| Case Type | MAC 110 |
| Hold-down | B13 |
| Handles | Yes |
| End Venting | Yes |
| Lid Type | SMF |
| Flame Arrestor | Yes |
| Technology | Ca/Ca |
| Separator Type | PE |
| Recommended Charge Rate (A) | 8 |
| VDA Roll Over Test | No |











