الجزائر (Al-Jazā’ir) 
المغرب (Al-Maghrib) 
تونس (Tūnis) 
ليبيا (Lībiyā) 
مصر (Miṣr) 
الأردن (Al-ʾUrdunn) 
السعودية (As-Saʿūdiyyah) 
لبنان (Lubnān) 
België / Belgique / Belgien 
България (Bǎlgariya) 
Bosna i Hercegovina 
Česko 
Србија (Srbija) 
Crna Gora 
Danmark 
Deutschland 
Eesti 
Éire 
Ελλάδα (Elláda) 
España 
France 
Hrvatska 
Ísland 
Italia 
Kosovo 
Κύπρος (Kýpros) / Kıbrıs 
Latvija 
Lëtzebuerg / Luxembourg / Luxemburg 
Lietuva 
Macedonia 
Magyarország 
Micronesia 
Nederland 
Norge 
Österreich 
Polska 
Portugal 
România 
Schweiz / Suisse / Svizzera / Svizra 
Shqipëria 
Slovenija 
Slovensko 
Suomi 
Sverige 
United Kingdom 
Україна (Ukraina) 
10 October 2025
12V 46Ah 425A(EN) - GS SMF series battery
Short Part Number
12V 46Ah 425A(EN) - GS SMF series battery
SMF063
12V 46Ah 425A(EN) - GS SMF series battery
RRP
£63.99
- Approximately 40,000 starts
- Sealed tip/tilt double lid
- Calcium/Calcium plates
- State of Charge Indicator (SOCI)
- Integrated carrying handle & flame arrestor
Specification
| Range | GS SMF |
|---|---|
| Nominal Voltage | 12 V |
| Performance Marking | W4-C2-V2-E1 |
| Capacity (20hr) | 46 Ah |
| CCA | 425 A |
| Length | 207 mm |
| Width | 175 mm |
| Terminal Type | T1 |
| Height | 175 mm |
| Layout | 0 |
| Case Type | LB1 DIN |
| Hold-down | B13/B14 |
| Handles | Yes |
| End Venting | Yes |
| Lid Type | SMF |
| Flame Arrestor | Yes |
| Technology | Ca/Ca |
| Separator Type | PE |
| Recommended Charge Rate (A) | 4 |
| VDA Roll Over Test | No |
Product specifications are provided for guidance only and may vary due to manufacturing across multiple production facilities. Changes to product details may occur without prior notice.
- Approximately 40,000 starts
- Sealed tip/tilt double lid
- Calcium/Calcium plates
- State of Charge Indicator (SOCI)
- Integrated carrying handle & flame arrestor
Specification
| Range | GS SMF |
|---|---|
| Nominal Voltage | 12 V |
| Performance Marking | W4-C2-V2-E1 |
| Capacity (20hr) | 46 Ah |
| CCA | 425 A |
| Length | 207 mm |
| Width | 175 mm |
| Terminal Type | T1 |
| Height | 175 mm |
| Layout | 0 |
| Case Type | LB1 DIN |
| Hold-down | B13/B14 |
| Handles | Yes |
| End Venting | Yes |
| Lid Type | SMF |
| Flame Arrestor | Yes |
| Technology | Ca/Ca |
| Separator Type | PE |
| Recommended Charge Rate (A) | 4 |
| VDA Roll Over Test | No |
